
| Item | Specifications |
|---|---|
| Model | UB-7 Parallel Clevis |
| Nominal Breaking Load | 70 kN |
| Material | Hot-dip galvanized steel body, separate stainless steel locking pin supplied together |
| Corrosion Protection | Hot-dip galvanized coating thickness reaches above 65μm, fully meets the anti-rust standards for power transmission fittings |
| Plate Width | 7 mm |
| Connection Aperture | 16 mm, fits standard M16 bolts perfectly |
| Overall Dimensions | 80mm length × 7mm width × 7mm thickness |
Known as UB-7 or UB-0770, this right-angle parallel clevis is a practical hardware part widely used for 10kV to 35kV overhead lines and substation facilities. It is fabricated by bending integral steel plates and treated with hot-dip galvanization. The coating reaches over 65μm in thickness to resist outdoor corrosion over long service periods. Equipped with stainless steel closing pins, it maintains stable connection performance. With a rated breaking load of 70 kN, it is commonly used to connect insulator strings, secure substation equipment and fix cable terminals.
Designed with a 90-degree angle, this fitting transfers vertical force steadily, making it ideal for mounting insulator strings vertically on tower crossarms. Each unit weighs around 0.57 kg after galvanization. The 16mm standard hole is designed to work with M16 bolts for easy installation. It serves as a versatile basic connector for medium and low voltage power transmission projects.
This clevis fits a wide range of field applications. It is widely installed at the starting point of ground wire suspension sets on straight 35kV towers. For 110kV line construction, it connects overhead conductors and insulator assemblies to bear regular operational tension. In high-altitude areas, it works well for line jumpers with a 48mm angle to keep all connections firm. Thanks to its special angular structure, it is also a reliable choice for angle tower reinforcement, equipment terminal connection and optical cable installation.
Proper supporting hardware is required during on-site installation. We recommend hot-dip galvanized M16 bolts paired with lock washers to prevent loosening caused by continuous line vibration. Ball head brackets link suspension insulators with the clevis, while bowl head adapters match insulator bowls to form a complete suspension set. Clamps for copper-aluminum transition are applied at transformer terminals, and strain clamps are used to fix ground wires on angle towers.
The installation follows standard and straightforward procedures. Before work starts, verify that all hardware specifications suit actual working conditions, and check the galvanized surface for damage or rust. Mark mounting positions on tower crossarms or brackets, drill 16mm holes and remove all debris inside. Place the clevis firmly against the mounting surface, insert bolts and washers, then tighten the fasteners evenly in several steps. Double-check the connection before putting the fitting into service.
Hot Tags: ub-7 clevis, China ub-7 clevis manufacturers, suppliers, factory, PS Clevis, PD 0770 Clevis, PD 1080 type Clevis, P type Clevis, UB 12 type Clevis, Z 42150 type Clevis