U-Shaped Metallic Hanging Ring

Send Inquiry
U-Shaped Metallic Hanging Ring
Details
The U-Shaped Metallic Hanging Ring consists of a U-shaped body and pins/bolts/cotter pins, used for lifting, fixing, supporting, and connecting. It comes in two structural types: closed-loop and semi-closed-loop, and features structural stability, strong adaptability, environmental resistance, and a high safety factor. In the power industry, it is mainly used for connecting insulators on overhead lines, fixing hardware on towers, and suspending cables. It is a core connecting component of power transmission systems and has wide applications in both domestic and export markets.
Category
Hanging Ring
Share to
Description
U-Shaped Metallic Hanging Ring

 

Product Specifications and Standards

Parameter Specification
Product Name

U-Shaped Metallic Hanging Ring

Structure Type Closed Ring / Semi-closed Ring
Composition U-shaped body + pin / bolt / cotter pin
Rated Load 69 kN - 200 kN
Surface Treatment Hot Dip Galvanized + Passivation
Production Standard IEC 61466 / GB 2314
Material Options Carbon Steel / SS 304 / SS 316 / Alloy Steel

 

 

Core Functions in the Power Industry

1. Insulator Connection: Connection nodes between overhead lines and insulator strings;

2. Tower Hardware Fixing: Fixing connections for tower hardware;

3. Cable/Conductor Suspension: Heavy-duty hanging rings for high-voltage lines, used in conjunction with insulator strings and towers, to transfer conductor tension.

 

Core Product Advantages

1. Multi-Material Compatibility: High-performance carbon steel, salt spray resistant stainless steel, and extreme load resistant alloy steel, covering light to heavy load scenarios;

2. Heavy-duty Anti-corrosion Treatment: Galvanized + passivated, adaptable to harsh environments such as humidity, salt spray, and chemical environments;

3. Clear Load Classification: Rated load of 69-200kN, conforming to IEC 61466 and GB 2314 international power fitting standards, meeting export requirements of multiple countries;

4. Stable and Safe Structure: Closed-loop/semi-closed-loop precision forming and reinforcement treatment, high safety factor.

 

Material Selection Parameter Table

Material Tensile Strength Yield Strength Key Features Applicable Scenarios
Carbon Steel 400-600 MPa 235-355 MPa Carbon content 0.12%-0.45%, low cost, high strength, high cost performance Medium-duty lifting machinery, main export material 
Stainless Steel 304 ≥515 MPa - 18% chromium, 8% nickel, strong corrosion resistance Humid & light salt spray environment 
Stainless Steel 316 ≥515 MPa - Added molybdenum, salt spray & chemical corrosion resistance improved by over 50% Marine, coastal, chemical applications 
Alloy Steel ≥800 MPa ≥650 MPa Heat resistance -40℃ to 300℃, good fatigue resistance Extreme load environment

Usage and Maintenance Points

1. Load Management: Avoid overload to prevent plastic deformation and fracture. When components are connected in series, ensure even load distribution.

2. Regular Inspection: It is recommended to inspect every 3 months for deformation/cracks, loose pins/bolts/corrosion. Tighten loose pins/bolts, replace deformed ones, and discontinue use if unqualified.

3. Cleaning and Maintenance: In dry environments, dust with a dry cloth (do not use wet cloths or corrosive cleaners). In marine environments, rinse with clean water, dry, and apply anti-rust oil.

4. Storage: Store in a dry, ventilated, and cool place, away from moisture, direct sunlight, and acid/alkali corrosion. Stack different materials separately, with a stacking height ≤ 1.5 meters.

5. Replacement Criteria: Replace when the component has cracks or plastic deformation, surface rust exceeding 30%, large-area coating peeling, or loose pins/bolts that cannot be tightened.

 

Quality and Export Services

All U-Shaped Metallic Hanging Rings undergo mechanical performance testing before leaving the factory, conforming to standards such as IEC 61466 and GB 2314. Customization is available in multiple materials including carbon steel, 304/316 stainless steel, and alloy steel. Test reports and material certificates are provided to meet the export requirements of Southeast Asia, Europe, America, the Middle East, and other markets.

 

Hot Tags: u-shaped metallic hanging ring, China u-shaped metallic hanging ring manufacturers, suppliers, factory, U shaped Hanging Ring, hanging ring, QH type ball head hanging ring, QH Ball Head Hanging Ring, Ball Head Hanging Ring

Send Inquiry