LV-3018 Yoke Plate

Rational Three-Hole Structural Design
Equipped with differentiated primary and secondary holes：main hole Φ39±0.5 mm, auxiliary hole Φ32±0.5 mm. The differentiated hole layout satisfies multi-scene assembly requirements, avoids assembly interference during insulator and conductor installation, and guarantees uniform force distribution during tension bearing.

Full hot-dip galvanized finish with 70–100 μm zinc layer thickness. Professional salt spray testing verifies over 1000 hours of exposure without red rust forming. Under normal outdoor operating conditions, the fitting can serve up to 50 years with minimal upkeep, cutting long-term operation costs for power projects. It adapts seamlessly to dry, humid, and moderately corrosive outdoor working environments.

Daily Maintenance
Routine Visual Check
Regularly examine the galvanized surface for white rust. Wipe off rust deposits with soft fabric and touch up with zinc-rich anti-corrosion paint if spotted;
Periodic Thickness Inspection
For dry-area deployment, test zinc coating thickness every 5 years. Re-do anti-corrosion galvanizing once the thickness drops below 50 μm;
Protection for Severe Working Conditions
Install rubber protective sleeves to mitigate direct friction between the yoke plate and matched hardware, reducing coating abrasion;
Timely Replacement Rule
If coating damage, deformation or crack defects are found during inspection, replace the fitting immediately to eliminate line safety hazards;
Product Standard
All LV-3018 yoke plates are fully hot-dip galvanized carbon steel power fittings, produced in strict accordance with power fitting industry standards, suitable for global overhead power transmission and distribution engineering projects.

Wide Application Scenarios for Power Engineering
Overhead Transmission Line Assembly
Parallel assembly of double or multi-strand insulator strings, securing stable suspension on transmission poles and towers;
Conductor Fixation & Connection
Reliable clamping for single conductor or split conductor layouts, widely adopted in overhead power line construction;
Guy Wire Tension Support
Dual guy wire combination to supply lasting tension support, ideal for tension string structures on transmission towers;
Suspension & Tension Nodes
Supports double-support single insulator string suspension sets, as well as connection fittings for straight and angle transmission towers;
Insulator String Matching
Compatible with double tension insulator string for single conductor, or single insulator string for two-split conductor layout