Classification Of Hanging Boards

Traditional double-piece back hanging boards
It is composed of two identical small hanging boards, one on the top and one on the bottom. When installing, install one of them first, and then install the other one after determining the position. There are two fixing holes on each board, which are divided into left and right parts and are close to each other. It is difficult to ensure the installation is flat. When installing the other board, it is necessary to measure the distance and vertical position, which is very inconvenient. Moreover, the water heater cannot be fixed after hanging it, and it is relatively light. Once there is external force, if someone accidentally touches it, the water heater is easy to fall off and cause danger.
Integral single-board hanging board
First, fix the back hanging board vertically on the wall. The lower part is designed to be bent perpendicular to the wall. There is a fixing hole. There are also corresponding screw holes on the bottom shell of the water heater. Hang the water heater on the hook of the back hanging board, and then use a self-tapping screw to fix the hanging board and the bottom of the water heater. The water heater is very stable and safe. The water heater can only be removed after the screw is removed.
Fixing method: Hang the top of the surface shell on the top of the bottom shell, and the surface shell covers the bottom shell. After the cover is flat, fix it with screws at the bottom. Convenient for production and maintenance.
Embedded installation slot of back-mounted plate: Embedded installation of back-mounted plate can reduce the total thickness of the water heater, occupy the extra internal space, make the machine thinner, and reduce the distance between the bottom of the casing and the wall, so that the machine installation is more stable and does not shake.
Description: Due to the use of such a structure, when using it, first fix the vertical plate of the base to the wall, and then move the hook on the vertical plate in the guide groove of the back plate, and the hook and the baffle can be matched, which is convenient for installation; and the horizontal plate supports the bottom plate of the bottom shell and can be detachably connected, which enhances stability. In addition to vertical installation, this fixing device can be installed horizontally according to the structure of the water heater, that is, it can be installed on the wall in a clockwise or counterclockwise direction of 90 degrees.